CY SPRAYING & PURIFICATION TECHNOLOGY LIMITED

+86-13712778386
BLOG

If you need to buy a nozzle, you should understand your needs and how the nozzle works before doing so. You will get the proper nozzle.

The working principle of the fog nozzle is that the fine liquid column ejected from the nozzle hits the target needle with the same diameter as the nozzle hole and then forms excellent atomization. In some applications, this nozzle even Replaces many expensive two-fluid air atomizing nozzles that use compressed air or water vapor as the second fluid.

The fog nozzle’s orifice diameter is between 0.1mm-0.5mm; under the pressure of 5kg-30kg, the nozzle forms excellent atomization, which can be widely used in artificial fog, livestock farms, greenhouses, and other applications requiring humidification. In the case of spraying, the power consumption per kilogram of fog is 3W, and the use cost is meager. The nozzle orifice diameter is between 0.1mm-0.5mm. Under 5kg and 30kg pressure, the nozzle forms excellent atomization, widely used in artificial fog, livestock farms, greenhouses, and other applications requiring humidification. In the case of spraying, the power consumption per kilogram of fog is 3 watts, and the use cost is meager.

The operational characteristics of the FOG nozzle:

·High energy conversion rate

Low-pressure value/flow

The internal design is not complicated, and the anti-blocking ability is strong

·Good atomization effect

·Spray shape is a saddle-type

·Solid conical water mist

·You can install Teflon filter

· Controllable droplet diameter

Facebook
Twitter
LinkedIn

Leave a Reply

Your email address will not be published. Required fields are marked *

twelve − 9 =